PCF8563TD datasheet(5/12 Pages) PHILIPS

5 / 12 page

UM10206

User manual

Rev. 01 — 13 June 2006

5 of 12

Philips Semiconductors

UM10206

I2C Demonstration Board 2005-1 Quick Start Guide

Hardware description

Figure 2 shows the following items on the hardware:

• USB Port: port where the USB cable is plugged into the board.

• USB_LINK LED: this green LED will illuminate when the cable is connected between

the PC and the hardware.

• remote sensor diode: where the remote sensor diode is plugged into the board to

allow the SA56004E temperature sensor to monitor the ambient temperature.

• microcontroller: a socketed microcontroller is provided to ensure easy service in the

event of damage to the device.

• extension connector: this connector is used to connect future daughter cards targeting

specific Philips Semiconductors I2C-bus devices.

Remark: Philips recommends connecting only daughter cards developed and provided by

Philips Semiconductors to the extension connector. Philips Semiconductors is not

responsible for damage caused by other target cards.

Fig 2.

I2C Demonstration Board 2005-1

Microcontroller

Remote Sensor Diode

USB Port

USB Link Indicator

Expansion Connector

PCF8563TD データシート(PDF) 5 Page - NXP Semiconductors