 |
データシートサーチシステム |
|
|
データシートサーチシステム |
|
L6360 データシート(PDF) 19 Page - STMicroelectronics |
|
|
|||||||||||||||||||||||||||||
L6360 データシート(HTML) 19 Page - STMicroelectronics |
|
|
19 / 65 page  L6360 Device configuration Doc ID 022817 Rev 2 19/65 When the I2C microcontroller cell is disabled, the SDA and SCL ports revert to being standard I/O port pins. On the L6360, the SDA output is an open drain pin. 6.1.5 Mode selection Possible data transfer formats are: ● The master transmitter transmits to the slave receiver. The transfer direction is not changed (see Figure 5). ● The slave receiver acknowledges each byte. ● The master reads data from the slave immediately after the first byte (see Figure 6). At the moment of the first acknowledge, the master transmitter becomes a master receiver and the slave receiver becomes a slave transmitter. This first acknowledge is still generated by the slave. Subsequent acknowledges are generated by the master. The STOP condition is generated by the master which sends a not-acknowledge (A) just prior to the STOP condition. Figure 5. A master transmitter addressing a slave receiver with a 7-bit address (the transfer is not changed) Figure 6. A master reads data from the slave immediately after the first byte |
|
リンク URL |
| ALLDATASHEETはお客様のビジネスに役立ちますか？ [ DONATE ] |
Alldatasheetは | 広告 | お問い合わせ | プライバシーポリシー | データシートへのリンク | リンク交換 | メーカーリスト All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |
Japanese ▼
English
Chinese
German
Japanese
Russian
Korean
Spanish
French
Italian
Portuguese
Polish
Vietnamese
Indian
Mexican
British
New Zealand
