| データシートサーチシステム |
|
AM29F016D データシート(PDF) 26 Page - SPANSION |
|
|
|||||||||||||||||||||||||||||
AM29F016D データシート(HTML) 26 Page - SPANSION |
|
26 / 44 page ![]() 24 Am29F016D 21444E9 November 16, 2009 D A TA SH EE T ABSOLUTE MAXIMUM RATINGS Storage Temperature Plastic Packages . . . . . . . . . . . . . . .–65 ° C to +125° C Ambient Temperature with Power Applied. . . . . . . . . . . . . .–55 ° C to +125° C Voltage with Respect to Ground VCC (Note 1) . . . . . . . . . . . . . . . . . –2.0 V to 7.0 V A9, OE#, RESET# (Note 2) . . . . –2.0 V to 12.5 V All other pins (Note 1). . . . . . . . . . –2.0 V to 7.0 V Output Short Circuit Current (Note 3) . . . . . . 200 mA Notes: 1. Minimum DC voltage on input or I/O pins is –0.5 V. During voltage transitions, inputs may overshoot VSS to –2.0 V for periods of up to 20 ns. See . Maximum DC voltage on output and I/O pins is VCC + 0.5 V. During voltage transitions, outputs may overshoot to VCC + 2.0 V for periods up to 20 ns. See . 2. Minimum DC input voltage on A9, OE#, RESET# pins is –0.5V. During voltage transitions, A9, OE#, RESET# pins may overshoot VSS to –2.0 V for periods of up to 20 ns. See . Maximum DC input voltage on A9, OE#, and RESET# is 12.5 V which may overshoot to 13.5 V for periods up to 20 ns. 3. No more than one output shorted at a time. Duration of the short circuit should not be greater than one second. Stresses greater than those listed in this section may cause permanent damage to the device. This is a stress rating only; functional operation of the device at these or any other conditions above those indicated in the operational sections of this specification is not implied. Exposure of the device to absolute maximum rating conditions for extended periods may affect device reliability. OPERATING RANGES Industrial (I) Devices Ambient Temperature (TC) . . . . . . . . .–40° C to +85° C VCC Supply Voltages VCC for ± 10% devices . . . . . . . . . . . .+4.5 V to +5.5 V Operating ranges define those limits between which the functionality of the device is guaranteed. 20 ns 20 ns +0.8 V –0.5 V 20 ns –2.0 V Figure 6. Maximum Negative Overshoot Waveform 20 ns 20 ns VCC +2.0 V VCC +0.5 V 20 ns 2.0 V Figure 7. Maximum Positive Overshoot Waveform |
|
リンク URL |
| ALLDATASHEETはお客様のビジネスに役立ちますか? [ DONATE ] |
Alldatasheetは | 広告 | お問い合わせ | プライバシーポリシー | データシートへのリンク | リンク交換 | メーカーリスト All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |