LE75S-CD

75W Single Output

LED Driver Series

2

www.slpower.com

LE75S-CD REV 2.0 11-FEB-13

Input Fuses

XA, 250VAC fuses provided on all models

Overload

Protection

Constant Current

Earth Leakage

Current

<1mA@277Vac, 50Hz

Short Circuit

Protection

Provided - no damage to unit, self-recovery.

Efficiency

See Models chart.

Overvoltage

Protection

Latch mode. AC input will need to be reset to

return to normal operation after an OVP condition.

See chart for trip range.

Output Power

75W continuous

Overtemperature

Protection

Latch mode. AC input will need to be reset to

return to normal operation after an OTP

condition. Trip Temperature = 110°C typical.

Ripple and Noise

See chart

Operating

Temperature

Operating:

-35°C to +70°C

Non-operating: -40°C to +85°C

Output Voltage

See chart

Relative

Humidity

10% to 95% operating

5% to 100%, non-operating

Total Regulation

+/- 3%. See chart

Safety Standards

UL8750, UL935, UL1012, UL1310 Class 2;

CSA-C22.2 No. 107.1, CSA C22.2 No. 223-M91

Class 2; EN61347-1, EN61347-2-13

Dimensions

W: 2.66” x L: 5.91” x H: 1.46”

MTBF

450,000 hours (2800mA model, at 110Vac input,

80% load, 25°C ambient, per MIL-HDBK-217F).

Weight

750g

Lifetime

65,000 hours (2800mA model, at 110Vac input,

80% load, 45°C ambient temperature.

EMI/EMC Compliance

Emissions

EN55015, Radiated & Conducted with 6db of margin

EMI for Lighting Equipment

EN61547

Static Discharge Immunity

EN61000-4-2, 4kV Contact Discharge, 8kV air discharge

Radiated RF Immunity

EN61000-4-3

EFT/Burst Immunity

EN61000-4-4

Line Surge Immunity

EN61000-4-5, 2kV line-line, 4kV line-earth

Conducted RF Immunity

EN61000-4-6

Power Frequency Magnetic Field Immunity

EN61000-4-8

Voltage Dip Immunity

EN61000-4-11

Line Harmonic Emissions

EN61000-3-2

Flicker Test

EN61000-3-3

Transient Protection

ANSI/IEEE C62.41-1991: Class A operation. Line transient of 7 strikes of a 100kHz ring wave,

2.5kV level, common and differential mode.