ATS632LSC

HALL-EFFECT

GEAR-TOOTH SENSOR

SUBASSEMBLY

115 Northeast Cutoff, Box 15036

Worcester, Massachusetts 01615-0036 (508) 853-5000

Allegro MicroSystems, Inc. reserves the right to make, from time to time,

such departures from the detail specifications as may be required to permit

improvements in the design of its products.

The information included herein is believed to be accurate and reliable.

However, Allegro MicroSystems, Inc. assumes no responsibility for its use;

nor for any infringements of patents or other rights of third parties which may

result from its use.

ADAPTIVE THRESHOLD SENSORS

SELECTION GUIDE

Part Number

Application

ATS535CSB

Programmable, TPOS, large-tooth gear-position or proximity sensing (commercial temp. range)

ATS535JSB

Programmable, TPOS, large-tooth gear-position or proximity sensing (industrial/auto. temp. range)

ATS610LSA

Large-tooth, gear-position sensing – crank angle, cam angle

ATS610LSC

Large-tooth, gear-position sensing

with internal voltage regulator – crank angle, cam angle

ATS611LSB

Fine-pitch, large air gap, gear speed sensing – transmission speed, ABS

ATS612JSB

Large/small-tooth gear-position sensing – crank angle, transmission speed,

cam angle

ATS632LSA

Large-tooth, gear-position sensing (LOW digital output state over a tooth),

cam angle

ATS632LSC

Large-tooth, gear-position sensing (LOW digital output state over a tooth),

with internal voltage regulator – cam angle

ATS640JSB

TPOS, gear-position sensing for two-wire applications