MP24971DN datasheet(2/14 Pages) MPS

2 / 14 page

MP24971 –1.5A, 50V, 100kHz, 5V FIXED OUTPUT STEP-DOWN CONVERTER

MP24971 Rev. 1.01

www.MonolithicPower.com

1/6/2012

MPS Proprietary Information. Patent Protected. Unauthorized Photocopy and Duplication Prohibited.

ORDERING INFORMATION

Part Number

Package

Top Marking

Operating Temperature (TJ)

MP24971DS*

SOIC8

MP24971

-40

C to +125C

MP24971DN**

SOIC8E

MP24971

-40

C to +125C

* For Tape & Reel, add suffix –Z (eg. MP24971DS–Z);

For RoHS, compliant packaging, add suffix –LF (eg. MP24971DS–LF–Z).

** For Tape & Reel, add suffix –Z (eg. MP24971DN–Z);

For RoHS, compliant packaging, add suffix –LF (eg. MP24971DN–LF–Z).

PACKAGE REFERENCE

SOIC8

SOIC8E

ABSOLUTE MAXIMUM RATINGS (1)

Input Voltage VIN .......................................... 60V

VISN, VISP, VVOS........................................0V to 8V

|VISN -VISP| ...........................................0V to 0.4V

VSW..................................... -0.3V to (VIN + 0.3V)

VBST ................................................... VSW + 6.5V

All Other Pins...............................-0.3V to +6.5V

Junction Temperature...............................150°C

Lead Temperature ....................................260°C

Storage Temperature............... -65°C to +150°C

Continuous Power Dissipation (TA = 25°C)

(2)

SOIC8 ...................................................... 1.38W

SOIC8E...................................................... 2.5W

ESD Susceptibility

HBM (Human Body Mode).......................... 2kV

Recommended Operating Conditions

(3)

Input Voltage VIN................................. 8V to 50V

Maximum Junction Temp. (TJ) ................ 125°C

Thermal Resistance

(4)

θJA

θJC

SOIC8..................................... 90 ...... 45... °C/W

SOIC8E .................................. 50 ...... 10... °C/W

Notes:

1) Exceeding these ratings may damage the device.

2) The maximum allowable power dissipation is a function of the

maximum junction temperature TJ (MAX), the junction-to-

ambient thermal resistance θJA, and the ambient temperature

TA. The maximum allowable continuous power dissipation at

any ambient temperature is calculated by PD (MAX) = (TJ

(MAX)-TA)/θJA. Exceeding the maximum allowable power

dissipation will cause excessive die temperature, and the

regulator will go into thermal shutdown. Internal thermal

shutdown circuitry protects the device from permanent

damage.

3) The device is not guaranteed to function outside of its

operating conditions.

4) Measured on JESD51-7, 4-layer PCB.

MP24971DN データシート(PDF) 2 Page - Monolithic Power Systems

MP24971DN データシート(HTML) 2 Page - Monolithic Power Systems

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14

データシートダウンロード