STM32F107VB datasheet(55/103 Pages) STMICROELECTRONICS

55 / 103 page

STM32F105xx, STM32F107xx

Electrical characteristics

Doc ID 15274 Rev 6

55/104

5.3.12

I/O current injection characteristics

As a general rule, current injection to the I/O pins, due to external voltage below VSS or

above VDD (for standard, 3 V-capable I/O pins) should be avoided during normal product

operation. However, in order to give an indication of the robustness of the microcontroller in

cases when abnormal injection accidentally happens, susceptibility tests are performed on a

sample basis during device characterization.

Functional susceptibilty to I/O current injection

While a simple application is executed on the device, the device is stressed by injecting

current into the I/O pins programmed in floating input mode. While current is injected into the

I/O pin, one at a time, the device is checked for functional failures.

The failure is indicated by an out of range parameter: ADC error above a certain limit (>5

LSB TUE), out of spec current injection on adjacent pins or other functional failure (for

example reset, oscillator frequency deviation).

The test results are given in Table 35

5.3.13

I/O port characteristics

General input/output characteristics

Unless otherwise specified, the parameters given in Table 36 are derived from tests

performed under the conditions summarized in Table 9. All I/Os are CMOS and TTL

compliant.

Table 35.

I/O current injection susceptibility

Symbol

Description

Functional susceptibility

Unit

Negative

injection

Positive

injection

IINJ

Injected current on OSC_IN32,

OSC_OUT32, PA4, PA5, PC13

-0

Injected current on all FT pins

-5

Injected current on any other pin

-5

Table 36.

I/O static characteristics

Symbol

Parameter

Conditions

Min

Typ

Max

Unit

VIL

Standard IO input low

level voltage

–0.3

0.28*(VDD-2 V)+0.8 V

IO FT(1) input low level

voltage

–0.3

0.32*(VDD-2V)+0.75 V

VIH

Standard IO input high

level voltage

0.41*(VDD-2 V)+1.3 V

VDD+0.3

IO FT(1) input high level

voltage

VDD > 2 V

0.42*(VDD-2 V)+1 V

5.5

VDD ≤ 2 V

5.2

STM32F107VB データシート(PDF) 55 Page - STMicroelectronics

STM32F107VB データシート(HTML) 55 Page - STMicroelectronics

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 ...More

データシートダウンロード