MTWS Series – Femtocell Stratum III TCXO

Specifications subject to change without notice

Page 3 of 3

Revision: MTWS061912B

MECHANICAL DIMENSIONS

NOTES: UNLESS OTHERWISE SPECIFIED

1.

APPLICABLE STANDARDS / SPECIFICATIONS: ANSI Y14.5M, DIMENSIONS AND

TOLERANCES.

2.

DIMENSIONS ARE MILLIMETERS [INCHES]. MILLIMETERS ARE THE CONTROLLING

DIMENSIONS, INCHES ARE FOR REFERENCE ONLY.

3.

THE PIN NUMBERS ARE FOR REFERENCE ONLY AND ARE NOT TO BE MARKED ON THE

UNIT.

4.

AN EXTERNAL BYPASS CAPACITOR IS RECOMMENDED.

5.

TOLERANCES ARE ±0.25 [.010] FOR TWO PLACE DECIMALS AND ±0.5 [.02] FOR ONE

PLACE DECIMALS.

6.

DO NOT SCALE DRAWING.