LP6836

Phone:

(408) 988-1845

http://

www.filss.com

Revised:

1/18/01

Fax:

(408) 970-9950

Email:

sales@filss.com

• ABSOLUTE MAXIMUM RATINGS

Parameter

Symbol

Test Conditions

Min

Max

Units

Drain-Source Voltage

10

V

Gate-Source Voltage

-4

V

Drain-Source Current

mA

Gate Current

18

mA

RF Input Power

180

mW

Channel Operating Temperature

175

ºC

Storage Temperature

—

-65

175

ºC

Total Power Dissipation

1.4

W

Notes:

•

Operating conditions that exceed the Absolute Maximum Ratings could result in permanent damage to the device.

•

•

Absolute Maximum Power Dissipation to be de-rated as follows above 25

°C:

• HANDLING PRECAUTIONS

To avoid damage to the devices care should be exercised during handling. Proper Electrostatic

Discharge (ESD) precautions should be observed at all stages of storage, handling, assembly, and

testing. These devices should be treated as Class 1A (0-500 V). Further information on ESD control

measures can be found in MIL-STD-1686 and MIL-HDBK-263.

• ASSEMBLY INSTRUCTIONS

The recommended die attach is gold/tin eutectic solder under a nitrogen atmosphere.

Stage

temperature should be 280-290

°C; maximum time at temperature is one minute. The recommended

wire bond method is thermo-compression wedge bonding with 0.7 or 1.0 mil (0.018 or 0.025 mm)

gold wire. Stage temperature should be 250-260

°C.

• APPLICATIONS NOTES & DESIGN DATA

Applications Notes are available from your local Filtronic Sales Representative or directly from the

factory.

Complete design data, including S-parameters, noise data, and large-signal models are

available on the Filtronic web site.

All information and specifications are subject to change without notice.