S101S06V Series

S201S06V Series

■ Features

SIP 4pin

Triac output SSR

3. 4 pin SIP package

4. High repetitive peak off-state voltage

5. High isolation voltage between input and output

6. Lead-free terminal components are also available

(see Model Line-up section in this datasheet)

7. Screw hole for heat sink

■ Description

S101S06V Series and S201S06V Series Solid

State Relays (SSR) are an integration of an infrared

emitting diode (IRED), a Phototriac Detector and a

main output Triac. These devices are ideally suited for

controlling high voltage AC loads with solid state

from input to output.

1

Notice The content of data sheet is subject to change without prior notice.

In the absence of confirmation by device specification sheets, SHARP takes no responsibility for any defects that may occur in equipment using any SHARP

devices shown in catalogs, data books, etc. Contact SHARP in order to obtain the latest device specification sheets before using any SHARP device.

S101S06V Series

S201S06V Series

■ Agency approvals/Compliance

1. Isolated interface between high voltage AC devices

and lower voltage DC control circuitry.

2. Switching motors, fans, heaters, solenoids, and

valves.

3. Power control in applications such as lighting and

temperature control equipment.

■ Applications

1. Recognized by UL508, file No. E94758 (as models No.

S101S06V/S201S06V)

2. Approved by CSA 22.2 No.14, file No. LR63705 (as

models No. S101S06V/S201S06V)

3. Package resin : UL flammability grade (94V-0)

Sheet No.:D4-A02201EN

Date Apr. 28. 2004

© SHARP Corporation