2

PS7029F

05/02/07

PI5C3384/3384C

10-Bit, 2-Port Bus switch

Maximum Ratings

(Above which the useful life may be impaired. For user guidelines, not tested.)

Storage Temperature .................................................................. –65°C to +150°C

Ambient Temperature with Power Applied ................................. –40°C to +85°C

Supply Voltage to Ground Potential (Outputs & D/O Only) ........ –0.5V to +7.0V

DC Input Voltage .......................................................................... –0.5V to +7.0V

DC Output Current.....................................................................................120 mA

Power Dissipation ..........................................................................................0.5W

Note:

Stresses greater than those listed under MAXIMUM

RATINGS may cause permanent damage to the device.

This is a stress rating only and functional operation

of the device at these or any other conditions above

those indicated in the operational sections of this

specification is not implied. Exposure to absolute

maximum rating conditions for extended periods

may affect reliability.

Parameters

Description

Min.

Max.

Units

Input HIGH Voltage

Guaranteed Logic HIGH Level

2.0

V

Input LOW Voltage

Guaranteed Logic LOW Level

–0.5

0.8

Input HIGH Current

–1

1

μA

Input LOW Current

–1

1

High-Impedance Output

Current

–1

1

Clamp Diode Voltage

PI5C3384

–0.7

–1.2

V

PI5C3384C

–1.8

100

mA

Input Hysteresis at Control

Pins

150

mV

57

Ω

10

15

Notes:

1. For Max. or Min. conditions, use appropriate value specified under Electrical Characteristics for the applicable device type.

3. Not more than one output should be shorted at one time. Duration of the test should not exceed one second.

4. Measured by the voltage drop between A and B pin at indicated current through the switch. On-Resistance is determined by the lower of the

voltages on the two (A,B) pins.

07-0124