AN3340

Loudspeaker compensation

Doc ID 18453 Rev 1

13/24

2.

Select the number of biquads dedicated to the speaker compensation. To do this it is

necessary to select the tab Coefficient Bank and then the number of biquads.

Figure 10 shows an example where all the biquads have been selected. There are a total of

8 biquads for this device.

Figure 10.

APW - select number of filter biquads

It is possible to decide to apply the compensation either to both channels or to only one

channel. To select both channels, choose the option “Auto-aligned channels” in the Channel

controls section of the tab Equalizer Editor as indicated in Figure 11.

Figure 11.

APW - how to select both channels