データシートサーチシステム
  Japanese  ▼
ALLDATASHEET.JP

X  

Preview PDF HTML

RM0345 データシート(PDF) 15 Page - STMicroelectronics

部品番号 RM0345
部品情報  calibration adapter board for SPC563M64xx devices
PDF  38 Pages
Scroll/Zoom Zoom In 100%  Zoom Out
メーカー  STMICROELECTRONICS [STMicroelectronics]
ホームページ  http://www.st.com
Logo STMICROELECTRONICS - STMicroelectronics

RM0345 データシート(HTML) 15 Page - STMicroelectronics

Back Button RM0345 Datasheet HTML 11Page - STMicroelectronics RM0345 Datasheet HTML 12Page - STMicroelectronics RM0345 Datasheet HTML 13Page - STMicroelectronics RM0345 Datasheet HTML 14Page - STMicroelectronics RM0345 Datasheet HTML 15Page - STMicroelectronics RM0345 Datasheet HTML 16Page - STMicroelectronics RM0345 Datasheet HTML 17Page - STMicroelectronics RM0345 Datasheet HTML 18Page - STMicroelectronics RM0345 Datasheet HTML 19Page - STMicroelectronics Next Button
Zoom Inzoom in Zoom Outzoom out
 15 / 38 page
background image
RM0345
Development connector
Doc ID 024080 Rev 3
15/38
5
Development connector
The JTAG signals and Nexus functionality with 12 Message Data Out (MDO) signals are
available on the JP1 development connector (Nexus connector).
A hardware control bit in the SPC563M64xx Nexus port controller, is used to control whether
the added signals for full width trace port are routed to the MDO[4:11] signals, or the
CAL_MDO[4:11] signals. This control bit is set by the cut trace J1 (default close) on the
NEXUSCFG pin of the SPC563M64xx device, as on the
calibration board the
CAL_MDO[4:11] signals are routed to the JP1 development connector.
Figure 8.
JP1 development connector
The option cut trace J3, J5 and J10 are listed on Figure 5.
Table 5.
J3, J5 and J10 option cut traces
option
name
Function
Value
Note
J3
CLKOUT
open
CLKOUT signal is disconnected to the Nexus JP1
connector
close
(default)
CLKOUT signal is connected to the Nexus JP1
connector
J5
VSTBY
open
VSTBY signal is disconnected to the Nexus JP1
connector
close
(default)
VSTBY signal is connected to the Nexus JP1
connector
J10
BOOTCFG1
open
BOOTCFG1 signal is disconnected to the Nexus
JP1 connector
close
(default)
BOOTCFG1 signal is connected to the Nexus
JP1 connector



Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38


データシート ダウンロード

Go To PDF Page


リンク URL



ALLDATASHEETはお客様のビジネスに役立ちますか？  [ DONATE ] 

Alldatasheetは   |   広告   |   お問い合わせ   |   プライバシーポリシー   |   データシートへのリンク    |   リンク交換   |   メーカーリスト
All Rights Reserved©Alldatasheet.com


Mirror Sites
English : Alldatasheet.com  |   English : Alldatasheet.net  |   Chinese : Alldatasheetcn.com  |   German : Alldatasheetde.com  |   Japanese : Alldatasheet.jp
Russian : Alldatasheetru.com  |   Korean : Alldatasheet.co.kr  |   Spanish : Alldatasheet.es  |   French : Alldatasheet.fr  |   Italian : Alldatasheetit.com
Portuguese : Alldatasheetpt.com  |   Polish : Alldatasheet.pl  |   Vietnamese : Alldatasheet.vn
Indian : Alldatasheet.in  |   Mexican : Alldatasheet.com.mx  |   British : Alldatasheet.co.uk  |   New Zealand : Alldatasheet.co.nz
Family Site : ic2ic.com  |   icmetro.com