 |
データシートサーチシステム |
|
|
データシートサーチシステム |
|
AN2208 データシート(PDF) 28 Page - STMicroelectronics |
|
|
|||||||||||||||||||||||||||||
AN2208 データシート(HTML) 28 Page - STMicroelectronics |
|
|
28 / 51 page  6 Electromagnetic compatibility (EMC) tests AN2208 28/51 6.6.1 Power supply tests Figure 25 illustrates the power supply test setup. The test voltage is applied by coupling decoupling networks CDN. The maximum voltage is 10 VRMS. The maximum distance between EUT and CDN is 0.3 meters. All Auxiliary Units (AU) such as power supplies switching devices must be placed on the wood isolation. 6.6.2 Input port tests Figure 26 illustrates the input port test setup. The test voltage from the signal generator to the EUT is applied by the current clamp. This device establishes inductive coupling to the cable connected to the EUT. The maximum distance between the EUT and the CC is 0.3 meters. The test is performed while the HSD input port is switched On/Off at 1Hz. 6.6.3 Output port tests Figure 27 illustrates the output port test setup. The power supply must be protected to disturbance signal by a decoupling network. The current clamp is used as the coupling device Figure 25. Power supply tests (IEC 61000-4-6) Figure 26. Input port tests (IEC 61000-4-6) |
|
リンク URL |
| ALLDATASHEETはお客様のビジネスに役立ちますか？ [ DONATE ] |
Alldatasheetは | 広告 | お問い合わせ | プライバシーポリシー | データシートへのリンク | リンク交換 | メーカーリスト All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |
Japanese ▼
English
Chinese
German
Japanese
Russian
Korean
Spanish
French
Italian
Portuguese
Polish
Vietnamese
Indian
Mexican
British
New Zealand
