AN2350 datasheet(23/41 Pages) STMICROELECTRONICS

部品番号	AN2350

部品情報	Guidelines for the control of a multiaxial planar robot with ST10F276

PDF	41 Pages

Scroll/Zoom	100%

メーカー	STMICROELECTRONICS [STMicroelectronics]

ホームページ	http://www.st.com

Logo

23 / 41 page

AN2350

Hardware and mechanical equipments

23/41

Figure 16.

The conditioning circuit for one incremental encoder

Using a trimmer it is possible to have a square wave with a duty cycle of 50% as output.

In this way from the two input sinusoidal signals it is possible to obtain two square signals

shifted each other of 90 degrees, through which it is possible to count 4096 pulses for each

rotation of the joint.

The conditioning circuit presents also a D flip-flop through which it is possible to obtain the

direction of rotation of the joint.

3.4

Schematics of the driver board and the interface board.

The driver board presents three 25 pin D-SUB male connectors to which are plugged the

cables of the wafer handler. In the same board there are 26 pin male connectors, used to

interface the SDK-ST10F276 board through three flat cables.

Figure 17 and Figure 18 show the schematic of the driver board.

AN2350 データシート(PDF) 23 Page - STMicroelectronics