UM0925

Getting started

Doc ID17271 Rev 2

9/22

If a problem occurs, a message box is displayed to indicate what the problem is:

●

If the development kit is used, the problem could be:

–

medium-range RF reader not plugged in the USB port

–

medium-range RF reader driver not installed

–

I2C bus reader not plugged in the USB port

–

I2C bus reader driver not installed

●

If the demo kit is used, the problem could be:

–

medium-range RF reader not plugged in the USB port

–

medium-range RF reader driver not installed

●

If the starter kit is used, the problem could be:

–

Short-range RF reader not plugged in the USB port

–

Short-range RF reader driver not installed

2.2

Main menu

When drivers have been installed correctly, and the selected reader has been connected to

the PC, the application main menu appears.

2.2.1

Data logger application menu

Use the menu at the top to start the data logger application.

See Figure 7