16.06.2011

SMC720

2 of 2

Soldering Conditions

•

DO NOT apply any stress to the lead particularly when heat.

•

After soldering the LEDs should be protected from mechanical shock or vibration until the LEDs

return to room temperature.

•

When it is necessary to clamp the LEDs to prevent soldering failure, it is important to minimize the

mechanical stress on the LEDs.

Temperature Profile

PCB Footprint Layout

(Unit: mm)

Static Electricity

•

LEDs are very sensitive to Static Electricity and surge voltage. It is recommended to always wear

a wrist band or an anti-electrostatic glove when handling the LEDs.

•

All devices, equipment and machinery must be grounded properly. It is recommended that

precautions should be taken against surge voltage to the equipment that mounts the LEDs.