TH02

Tel:+86-755-82973805 Fax: +86-755-82973550

Email:sales@hoperf.com

http://www.hoperf.com

-

4 . TH02 Connection Diagrams

The TH02 is a simple-to-use device requiring a minimum of external components. Figure 2 shows the typical

For ultra-low-power operation, such as in battery-powered applications. In this case, the TH02 is powered from

one of the MCU’s GPIOs. The GPIO can be driven high to powerup the TH02, once the measurement results are

obtained, the GPIO can be driven low to power-down the TH02, reducing its current consumption to zero. The GPIO

must be capable of sourcing 320 µA for the duration of the conversion time (<200 ms for relative humidity and

temperature conversions) and up to 40 mA for a period of

5 ms at power-up. The GPIO must also be capable of sinking up to 40 mA for a period of 5 ms at powerdown. If the

GPIO is not capable of sourcing/sinking 40 mA, then the TH02 will take longer to powerup and powerdown.

Figure 2. Recommended Connection Diagram for Low-Power Battery Operation