M24C16-DFCU6TP datasheet(18/35 Pages) STMICROELECTRONICS

部品番号	M24C16-DFCU6TP

部品情報	16-Kbit serial I²C bus EEPROM 4 balls CSP

PDF	35 Pages

Scroll/Zoom	100%

メーカー	STMICROELECTRONICS [STMicroelectronics]

ホームページ	http://www.st.com

Logo

18 / 35 page

Instructions

M24C16-DFCU

18/35

DocID026468 Rev 2

5.2

Read operations

After the successful completion of a Read operation, the device internal address counter is

incremented by one, to point to the next byte address.

For the Read instructions, after each byte read (data out), the device waits for an

acknowledgment (data in) during the 9th bit time. If the bus master does not acknowledge

during this 9th time, the device terminates the data transfer and switches to its Standby

mode.

Figure 7. Read mode sequences

5.2.1

Random Address Read

The Random Address Read is a sequence composed of a truncated Write sequence (to

define a new address pointer value, see Table 3) followed by a current Read.

Therefore the Random Address Read sequence is the sum of [Start + Device Select code

with R/W=0 + address byte] (without Stop condition, as shown in Figure 7) and [Start

condition + Device Select code with R/W=1]. The memory device acknowledges the

sequence and then outputs the contents of the addressed byte. To terminate the data

M24C16-DFCU6TP データシート(PDF) 18 Page - STMicroelectronics