MICROWAVE CORPORATION

8 - 193

For price, delivery, and to place orders, please contact Hittite Microwave Corporation:

12 Elizabeth Drive, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373

Order Online at www.hittite.com

8

Pin Number

Function

Description

Interface Schematic

1

Vcc

Power supply voltage for the first amplifier stage. An external bypass

capacitor of 330 pF is required as shown in the application schematic.

2, 3, 5, 6, 7,

8, 9, 12, 13,

15, 16

GND

Ground: Backside of package has exposed metal ground slug that must be

connected to ground thru a short path. Vias under the device are required.

4

RF IN

This pin is AC coupled and matched to 50 Ohms from 5.0 to 6.0 GHz.

10, 11

RF OUT

RF output and DC bias for the output stage.

14

Vpd

Power control pin. For maximum power, this pin should be connected to

3.0V. A higher voltage is not recommemded. For lower idle current, this

voltage can be reduced.

HMC415LP3

GaAs InGaP HBT MMIC

POWER AMPLIFIER, 4.9 - 5.9 GHz

v02.0604

Pin Descriptions