LP5904

SNVS637G – MARCH 2011 – REVISED APRIL 2013

www.ti.com

For best results during assembly, alignment ordinals on the PC board may be used to facilitate placement of the

DSBGA device.

DSBGA LIGHT SENSITIVITY

Exposing the DSBGA device to direct light may cause incorrect operation of the device. Light sources such as

halogen lamps can affect electrical performance if they are situated in proximity to the device.

Light with wavelengths in the red and infrared part of the spectrum have the most detrimental effect; thus, the

fluorescent lighting used inside most buildings has very little effect on performance.

14

Submit Documentation Feedback

Copyright © 2011–2013, Texas Instruments Incorporated

Product Folder Links: LP5904