| データシートサーチシステム |
|
LP8545 データシート(PDF) 1 Page - Texas Instruments |
|
|
|
|||||||||||||||||||||||||||||
LP8545 データシート(HTML) 1 Page - Texas Instruments |
|
1 / 44 page ![]() LP8545 www.ti.com SNVS635D – APRIL 2010 – REVISED DECEMBER 2013 High-Efficiency LED Backlight Driver for Notebooks Check for Samples: LP8545 1 FEATURES DESCRIPTION The LP8545 is a white LED driver with integrated 2 • High-Voltage DC/DC Boost Converter with boost converter. It has six adjustable current sinks Integrated FET with Four Switching Frequency which can be controlled by PWM input or with I2C- Options: 156/312/625/1250 kHz compatible serial interface. • Configurable for Use with External FET for The boost converter has adaptive output voltage Applications Needing Higher Output Voltage control based on the LED driver voltages. This • 2.7V – 22V Input Voltage Range to Support feature minimizes the power consumption by 1x…5x Cell Li-Ion Batteries adjusting the voltage to lowest sufficient level in all • Programmable PWM Resolution conditions. – 8 to 13 True Bit (Steady State) LED outputs have 8-bit current resolution and up to 13-bit PWM resolution with additional 1-3 bit dithering – Additional 1 to 3 Bits Using Dithering to achieve smooth and precise brightness control. During Brightness Changes Proprietary Phase Shift PWM control is used for LED • I2C and PWM Brightness Control outputs to reduce peak current from the boost • PWM Output Frequency and LED Current Set converter, thus making the boost capacitors smaller. Through Resistors The Phase Shifting scheme also eliminates audible noise. • Optional Synchronization to Display VSYNC Signal Internal EEPROM is used for storing the configuration data. This makes it possible to have minimum • 6 LED Outputs with LED fault (Short/Open) external component count and make the solution very Detection small. • Low Input Voltage, Over-Temperature, Over- Current Detection and Shutdown LP8545 has safety features which make it possible to detect LED outputs with open or short fault. As well • Minimum Number of External Components low input voltage and boost over-current conditions • WQFN 24-Pin Package, 4 x 4 x 0.8 mm are monitored and chip is turned off in case of these events. Thermal de-rating function prevents APPLICATIONS overheating of the device by reducing backlight brightness when set temperature has been reached. • Notebook and Netbook LCD Display LED Backlight LP8545 is available in TI's WQFN 24-pin package. • LED Lighting 1 Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of Texas Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet. 2 All trademarks are the property of their respective owners. PRODUCTION DATA information is current as of publication date. Copyright © 2010–2013, Texas Instruments Incorporated Products conform to specifications per the terms of the Texas Instruments standard warranty. Production processing does not necessarily include testing of all parameters. |
同様の部品番号 - LP8545 |
|
同様の説明 - LP8545 |
|
|
リンク URL |
| ALLDATASHEETはお客様のビジネスに役立ちますか? [ DONATE ] |
Alldatasheetは | 広告 | お問い合わせ | プライバシーポリシー | データシートへのリンク | リンク交換 | メーカーリスト All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |