Typical Applications

Note: Usually R1 = 240

Ω for LM150 and R1 = 120Ω for LM350.

1.2V–25V Adjustable Regulator

DS009061-1

Full output current not available

at high input-output voltages.

1 µF to 1000 µF of aluminum or tantalum electrolytic are commonly used

to provide improved output impedance and rejection of transients.

*Needed if device is more than 6 inches from filter capacitors.

Precision Power Regulator with Low Temperature

Coefficient

DS009061-13

Slow Turn-ON 15V Regulator

DS009061-14

Adjustable Regulator with Improved

Ripple Rejection

DS009061-15

*Discharges C1 if output is shorted to ground

High Stability 10V Regulator

DS009061-16

www.national.com

7