5/7

Part No. : LTE-R38386S-ZF

BNS-OD-FC 002/A4

IR Emitter and Detector

LTE-R38386S-ZF

Note: 1. All dimensions are in millimeters (inches).

2. Empty component pockets sealed with top cover tape.

3. 7 inch reel-600 pieces per reel.

4. The maximum number of consecutive missing parts is two.

5. In accordance with ANSI/EIA 481-1-A-1994 specifications.

8. CAUTIONS

8.1. Application

The LEDs described here are intended to be used for ordinary electronic equipment (such as office equipment, communication

equipment and household applications).Consult Liteon’s Sales in advance for information on applications in which exceptional

reliability is required, particularly when the failure or malfunction of the LEDs may directly jeopardize life or health (suc h as in

aviation, transportation, traffic control equipment, medical and life support systems and safety devices).

8.2. Storage

The package is sealed:

The LEDs should be stored at 30°C or less and 90%RH or less. And the LEDs are limited to use within

one year, while the LEDs is packed in moisture-proof package with the desiccants inside.

The package is opened:

The storage ambient for the LEDs should not exceed 30°C temperature or 60% relative humidity.

It is recommended that LEDs out of their original packaging are IR-reflowed within one week hrs.

For extended storage out of their original packaging, it is recommended that the LEDs be stored in a sealed container with

appropriate desiccant, or in a desiccators with nitrogen ambient.

LEDs stored out of their original packaging for more than one week hrs should be baked at about 60 deg C for at least 20

hours before solder assembly.

8.3. Cleaning

Use alcohol-based cleaning solvents such as isopropyl alcohol to clean the LEDs if necessary.