10

EC2(ND),EE2(ND) SERIES

DATA SHEET ER0327EJ2V0DS00

GUIDE TO APPLICATIONS

1. When connecting coils, refer to the pin configuration to prevent misoperation or malfunction.

2. The latch type relay should be initialized at the appointed position (set or reset position) when using, and should

be energized or deenergized to the specified polarity to avoid wrong operations by reversed contact state.

3. Ultrasonic cleaning is not recommended to keep contact performance reliable. Alcohol based solvents are

available as proper solvents.

4. Pressurized stress on the relay cover may affect reliable operation.

5. Minimum contact load of the relay is 100 mV, 100

µA. This value is a reference value in the resistance load.

Minimum capacity changes depending on swiching frequency and environment temperature and the load.