20

Quantity per reel

0201: 15,000 pieces / reel

0402: 10,000 pieces / reel

0603: 4,000 pieces / reel

The contents of a box

0201: 5 reels / box

0402: 5 reels / box

0603: 5 reels / box

Marking

The following item shall be marked on the reel.

a. Manufactures parts number.

b. Manufacturing date code.

c. Manufacturer name.

d. Manufactures lot number.

e. Quantity.

CAUTIONS

Storage

The chip inductor shall be packaged in carrier tapes.

To keep storage place temperature from +5 to 35ºC,

humidity from 45 to 70% RH.

The storage atmosphere must be free of gas containing

sulfur and chlorine. Also, avoid exposing the product to

saline moisture. If the product is exposed to such

atmospheres, the terminals will oxidize and solderability will

be affected.

The solderability is assured for 12 months from our final

inspection date if the above storage condition is followed.

Handling

Chip inductor should be handled with care to avoid

contamination or damage. The use of vacuum pick-up or

plastic tweezers is recommended for manual placement.

Tape and reeled packages are suitable for automatic pick

and placement machine.

Recommended pad dimensions

Soldering Profile for SMT Process with SnPb

Solder Paste

The rate of preheat should not exceed 4ºC/sec. and a target

of 2ºC/sec. is preferred. Ceramic chip components should

be preheated to within 100 to 130ºC of the soldering.

Soldering Profile for SMT Process with Lead

Free Solder Paste

The rate of preheat should not exceed 4ºC/sec. and a target

of 2ºC/sec. is preferred. Ceramic chip components should

be preheated to within 100 to 130ºC of the soldering.

Soldering

220°C to 230°C

5 ~ 10 sec.

Gradual

Natural Cooling

Preheating

over 1 min

over 1 min

Time (sec.)

Over 200°C, within 40 sec.

120 sec max

300

200

0

250

Soldering

240°C to 260°C

5 ~ 10 sec.

Gradual

Natural Cooling

Preheating

over 1 min

over 1 min

Time (sec.)

Over 200°C, within 90 sec.

120 sec max

0

300

200

250

c

a

b

Soldering resist

SMD Inductor

Land Pattern

Size (EIA)

L x W

a

b

c

0201

0.60 x 0.30

0.15 to 0.35

0.20 to 0.30

0.25 to 0.30

(0.024 x 0.012)

(0.006 to 0.014)

(0.008 to 0.012)

(0.010 to 0.012)

0402

1.00 x 0.50

0.30 to 0.50

0.35 to 0.45

0.40 to 0.50

(0.039 x 0.020)

(0.012 to 0.020)

(0.014 to 0.018)

(0.016 to 0.020)

0603

1.60 x 0.80

0.70 to 1.00

0.60 to 0.80

0.70 to 0.80

(0.063 x 0.031)

(0.028 to 0.039)

(0.024 to 0.031)

(0.028 to 0.031)

mm (inches)

Multi-Layer High Frequency

Ceramic Chip Inductors

LCMC Series