1

■Features

1. Rated up to 30A

Single position connector can carry current of 30A with 10

AWG conductor. Please refer to Table #1 for current ratings for

multi-position connectors using other conductor sizes.

2. Positive Locking Function

Reliable interior lock protects mated connectors from

accidental disconnection. (Fig.1)

3. Prevention of Incorrect Connections

To prevent incorrect connection when using multiple connectors

having the same Number of contacts, 3 product types having

different mating configurations are available. (Fig.2)

4. Molded-in contact retention tabs

Handling of terminated contacts during the crimping is

easier and avoids entangling of wires, since there are

no protruding metal tabs.

5. Prevention of incorrect board placement

Built-in posts assure correct connector placement and

orientation on the board.

6. Supports resin sealing

Allows potting up to 10mm.

7. Prevention of Short Circuits Between

Adjacent Contacts

Each Contact is completely surrounded by the housing

wall electrically isolating it from adjacent contacts.

8. Increased Retention Force of Crimped

Contacts

Improved pull-out force design.

9. Full Line of Crimp Socket Contacts

Hirose has released DF22C-

*S-7.92C which has easy

to push/release latch design. and DF22B-

*S-7.92C/

DF22C-

*S-7.92C which has improved electrical

insulation properties.

10. In-line Connections

Wire-to-wire connection is also available. Space is saved

with 2-row (2×2) layout for 4 pos.

11. UL, C-UL, and TÜV Certified.

Keying for multiple use

Positive

Lock

*The image on the left show header (the board dip

side), the image on the right show the socket

(cable side).

*The guide key position is indicated in position

facing the mating surface of the header.

Completely

enclosed

locking system

Protection from

shorts circuits

between adjacent

contacts

2016.1

e

DF22 Series

7.92mm Contact Pitch High-Current Connectors for Internal

Power Supplies (UL, C-UL and TÜV Listed)

Fig.1

Fig.2

12. Glow Wire compliance (Compliant with IEC 60695-2-11)