114- 7010

Rev F

2

of 20

IDC Connectors

IDC

Contact

Mating Face of

Receptacle

Guide

Post

Cover

Latch

Housing

Figure 2

2. REFERENCE MATERIAL

2.1. Revision Summary

This paragraph is reserved for a revision summary of changes covering the most recent additions and changes

made to this specification which include the following:

S

Updated format to corporate requirements

S

New logo

2.2. Customer Assistance

Reference Part Number 104652 and Product Code 5375 are representative numbers of AMPMODU 50/50 Grid

Connectors. Use of these numbers will identify the product line and expedite your inquiries through a service

network established to help you obtain product and tooling information. Such information can be obtained

through a local TE Representative or, after purchase, by calling the Tooling Assistance Center or Product

Information number at the bottom of page 1.

2.3. Drawings

Customer Drawings for specific products are available from the service network. The information contained in

Customer Drawings takes priority if there is a conflict with this specification or with any other technical

documentation supplied by TE.

2.4. Manuals

Manual 402--40 is available from the service network. This manual provides information on various flux types

and characteristics along with the commercial designation and flux removal procedures. A checklist is included

in the manual as a guide for information on soldering problems.

2.5. Specifications

A. Product Specifications

Product Specifications 108--1332 and 108--1443 cover test and performance requirements for the SMT

and IDC connectors respectively.