H-2/4HD-EM(S/H)

Input 2

Similarly, from the menu on left side of the webpage, clicking “Input 2”, it displays

the information of the programs (3

IP Output

Click “IP Output”, it will display the interface where to configure the output IP stream

in MPTS or SPTS the as Figure-4.

Figure-4

After setting the parameters, click “Apply” to save the settings.

This device supports 1 MPTS

& 4 SPTS IP output. Click the

related box to enable the

corresponding

program

to

output through IP Channel.

MPTS

4 SPTS for the 4 programs respectively

To configure the output IP

address and ports for the IP

Channels respectively.