Specifications

Storage Temperature Range

0~50 °C

Storage Humidity Range

20~90 %RH, Without condensation

Operating Humidity Range

30~90 %RH

Operating Temperature Range

0~50°C

Rated Working Voltage

AC 1 V (50Hz~1KHz)

Rated Power

0.3 mW

Nominal Impedance Value

60 kΩ ( 25°C, 50%RH)

Tolerance on Impedance Value

60 ±30 kΩ

Reliability (Impedance value change

as relative humidity at 25°C, 50%RH)

Dry Heat Storage

<±5 %RH ( 85°C, 1000 hr.)

Cold Storage

<±5 %RH (-40°C, 1000 hr.)

Damp Heat Storage

<±5 %RH ( 40°C, 90 %RH, 1000 hr.)

Low Humidity Storage

<±5 %RH ( 25°C 20 %RH, 1000 hr.)

Heat Cycle Test

<±5 %RH (-40°C ~ +85 °C, 100 cycles)

Notes

1. Don’t apply any direct current to the sensor.

2. Don’t touch the film and the surface of the sensor.

3. In use and stock, freezing, dust, mist, oil, alcohol,

corrosive gases or any other dirty/anomalous

ambient may cause degradation of the sensor’s

characteristics.

4. Protect the sensor film from flux/fume and high

temperature during the soldering.

5. Don’t put sensor in water.