Type A Insulation

AB6A8

Thermistor is welded to 38 gauge, nickel alloy 200,

bifilar heavy ISONEL insulated extension leads, 6.5 ft

(1.98 m) ±0.5 ft (±0.15 m) long. Liquid epoxy resin web

over weld joints provides some strain relief.

For insertion into plastic tubing or other insulators.

Maximum continuous operating temperature is 221°F

(105ºC).

Type B Insulation

AB6B2

Thermistors welded to 38 gauge, nickel alloy 200,

bifilar, heavy ISONEL insulated extension leads, 6.5

ft (1.98 m) ±1/2 ft (±0.15 m) long. Polyimide sleeve is

epoxied over weld joints and thermistor, for strain relief

and insulation.

For insertion into metal housings or tubings. Bead

covered for maximum strain relief and protection.

Maximum continuous operating temperature is 347°F

(175ºC).

Type D Insulation

AB6D2

Thermistor is welded to 38 gauge, nickel alloy 200,

bifilar, heavy ISONEL insulated extension leads, 6.5

ft (1.98 m) ±0.5 ft (±0.15 m) long. Small web of epoxy

is painted over weld joints for electrical isolation and

strain relief, and a heat sealed mylar sheath covers the

bead.

For fast response times, limited depth of immersion,

and best long term immersion qualities. Maximum

continuous operating temperature is 257°F (125°C).

Type E Insulation

AB6E3

Thermistor is welded to 38 gauge, nickel alloy 200,

bifilar, heavy ISONEL insulated extension leads 6.5

ft (1.98 m) ±0.5 ft (±0.15 m) long. Polyimide sleeve

is epoxied over welds for strain relief and electrical

insulation, multiple conformal dip coatings of liquid

epoxy resin are applied for complete immersibility in

conductive fluids.

For use in applications where fast response, good

strain relief and full immersion are required. Maximum

continuous operating temperature is 221°F (105ºC).

NTC Type AB6

Specifications

0.13 in (3.2 mm) reference

72 in (1830 mm) minimum

D

AB6B4

Thermistor is welded to 38 gauge, nickel alloy 200,

bifilar, heavy ISONEL insulated extension leads, 6.5

ft (1.98 m) ±0.5 ft (±0.15 m) long. Polyimide sleeve is

epoxied over weld joints and up to back of thermistor

bead, for strain relief and electrical insulation.

For insertion into metal housings or tubings with close

tolerances. Bead is exposed as much as possible

for faster response. Maximum continuous operating

temperature is 221°F (105ºC).

Type C Insulation

AB6C8

Thermistor bead is welded to 38 gauge, nickel alloy

200, bifilar, heavy ISONEL insulated extension leads, 6.5

ft (1.98 m) ±0.5 ft (±0.15 m) long. Multiple conformal

dipcoats of liquid epoxy resin are applied for complete

insulation when immersed in fluids.

For use where fastest response times are required and

assembly will be fully immersed in conductive fluids.

Maximum continuous operating temperature is 221°F

(105°C).

0.25 in (6.4 mm) reference

72 in (1830 mm) minimum

D

1.5 in (38 mm) reference

72 in (1830 mm) minimum

D

0.13 in (3.2 mm) reference

72 in (1830 mm) minimum

D

0.25 in (6.4 mm) reference

D

0.13 in (3.2 mm) reference

72 in (1830 mm) minimum

D

0.13 in (3.2 mm) reference

72 in (1830 mm) minimum