This document is proprietary. Any dispatch or disclosure of content is authorized only after written authorization by PULS GmbH.

All parameters are specified at 400V, 2.5A, 230Vac, 25°C ambient and after a 5 minutes run-in time unless otherwise noted.

Specification: SP-PAS395 Rev: 3.1

Date: 2013/01/19

14-14

15

Cooling

The charger has a temperature controlled fan included, which makes the unit suitable for any

mounting orientation and also suitable for applications where the heat cannot be transferred

through the base plate of the unit.

The fan will only run if needed during high temperatures. The fan will also run for 8 seconds

after applying sufficient input voltage. This allows to check the function of the fan. Furthermore,

the fan will run approximately every three hours for a short time to avoid a stiffness of the fan

after long breaks and to extend the life of the fan.

16

Approvals

GL (Germanischer Lloyd); planned

The CE mark indicates conformance with the:

- EMC directive 2004/108/EC,

- Low-voltage directive (LVD) 2006/95/EC and

- RoHS directive 2011/65/EU.