Issue: 1609 DRAFT RalfYe

In the effort to improve our products, we reserve the right to make changes judged to be necessary.

CONFIDENTIAL AND PROPRIETARY INFORMATION

This document contains confidential and proprietary information of Pulse Electronics, Inc. (Pulse) and is protected by copyright, trade secret and other state and federal laws.

Its receipt or possession does not convey any rights to reproduce, disclose its contents, or to manufacture, use or sell anything it may describe. Reproduction, disclosure or

use without specific written authorization of Pulse is strictly forbidden.

PART NUMBER: : DASCLINSERT

Series: Accessory

6

ASSEMBLY

Step 3,

Rotate the 2 clamps to the internal position, and insert mounting sleeve into the

hole of drywall and tighten screws until snug. See Figure 4. The clamps will swing out

and prevent extraction from the drywall. See Figure 5. The drywall will be clamped

tightly by the sleeve assembly.