THR-DS-Tgard-5000_032515

Any information furnished by Laird and its agents is believed to be accurate and reliable. All specifications are subject to change without notice. Responsibility for the use and

application of Laird materials rests with the end user, since Laird and its agents cannot be aware of all potential uses. Laird makes no warranties as to the fitness, merchantability

or suitability of any Laird materials or products for any specific or general uses. Laird, Laird Technologies, Inc or any of its affiliates or agents shall not be liable for incidental or

consequential damages of any kind. All Laird products are sold pursuant to the Laird Technologies’ Terms and Conditions of sale in effect from time to time, a copy of which will

be furnished upon request. © Copyright 2015 Laird Technologies, Inc. All Rights Reserved. Laird, Laird Technologies, the Laird Technologies Logo, and other marks are trademarks

or registered trademarks of Laird Technologies, Inc. or an affiliate company thereof. Other product or service names may be the property of third parties. Nothing herein

provides a license under any Laird or any third party intellectual property rights. Document A 15984-00 03/2015

Tgard™ 5000 Series

Thermally Conductive Insulators

PRESSURE

UNITS

10

(69)

25

(172)

50

(345)

100

(689)

200

(1379)

400

(2758)

TOTAL THERMAL RESISTANCE

Modified ASTM D5470

0.62

0.51

0.40

0.27

0.25

0.23

Modified ASTM D5470

4.0

3.29

2.58

2.06

1.61

1.48

T0-220

ºC/watt

1.31

1.00

0.82

0.65

0.58

0.54

Configurations available:

• Sheet form, roll form and die-cut parts

• Single-side, pressure-sensitive adhesive on request

Standard options:

• Without adhesive (A0): 12 x 18" sheets, 12" x 65M,

12" x 30M roll or custom configuration

• With adhesive (A1): 11.75 x 18" sheets, 11.75" x 30M roll

or custom configuration

Standard die cut parts:

Standard part sizes for TO-220, TO-247, TO-3P, TO-3PL and TO-264

Custom die cut parts:

Custom configurations available with standard tolerance of 0.5mm

(0.020”). Ability to handle drawings in multiple file formats. (.DXF

and .DWG preferred)

Data for design engineer guidance only. Observed performance varies in application.

Engineers are reminded to test the material in application.

PROPERTIES

TEST METHOD

METRIC VALUES

IMPERIAL VALUES

ELECTRICAL PROPERTIES

Dielectric withstand voltage

50mm probe for 30 sec

ASTM D149

4,500 volts DC

4,500 volts DC

Dielectric breakdown voltage

50mm probe

ASTM D149

Avg >6,000

volts AC

Avg >6,000

volts AC

Volume resistivity

ASTN D257

Dielectric constant @1Mhz

ASTN D257

3.4

3.4

MECHANICAL PROPERTIES

Thickness

0.127 mm

5 mils

Hardness

ASTM D2240

75 Shore A

75 Shore A

Tensile strength

ASTM D412

33.1 Mpa

4.8 Kpsi

Elongation along width or length

ASTM D412

45%

45%

Operating temperature range

-60º to 180ºC

-76º to 356ºF

Color

Tan

Tan

UL flammability rating

UL 94

V-0

V-0