LMC6041 datasheet(4/12 Pages) NSC

4 / 12 page

AC Electrical Characteristics (Continued)

Note 1: Absolute Maximum Ratings indicate limits beyond which damage to the device may occur. Operating conditions indicate conditions for which the device is

intended to be functional, but do not guarantee specific performance limits. For guaranteed specifications and test conditions, see the Electrical Characteristics. The

guaranteed specifications apply only for the test conditions listed.

Note 2: Applies to both single-supply and split-supply operation. Continuous short circuit operation at elevated ambient temperature can result in exceeding the

maximum allowed junction temperature of 110˚C. Output currents in excess of ±30 mA over long term may adversely affect reliability.

Note 3: The maximum power dissipation is a function of TJ(max), θJA, and TA. The maximum allowable power dissipation at any ambient temperature is PD = (TJ(max)

−TA)/θJA.

Note 4: Human body model, 1.5 k

Ω in series with 100 pF.

Note 5: Typical Values represent the most likely parametric norm.

Note 6: All limits are guaranteed at room temperature (standard type face) or at operating temperature extremes (bold face type).

Note 7: V+ = 15V, VCM = 7.5V and RL connected to 7.5V. For Sourcing tests, 7.5V ≤ VO ≤ 11.5V. For Sinking tests, 2.5V ≤ VO ≤ 7.5V.

Note 8: V+ = 15V. Connected as Voltage Follower with 10V step input. Number specified in the slower of the positive and negative slew rates.

Note 9: For operating at elevated temperatures the device must be derated based on the thermal resistance

θJA with PD = (TJ −TA)/θJA.

Note 10: All numbers apply for packages soldered directly into a PC board.

Note 11: Do not connect output to V+ when V+ is greater than 13V or reliability may be adversely affected.

Typical Performance Characteristics V

S = ± 7.5V, TA = 25˚C unless otherwise specified

Supply Current vs

Supply Voltage

DS011136-19

Offset Voltage vs

Temperature of Five

Representative Units

DS011136-20

Input Bias Current

vs Temperature

DS011136-21

Input Bias Current

vs Input Common-Mode

Voltage

DS011136-22

Input Common-Mode

Voltage Range vs

Temperature

DS011136-23

Output Characteristics

Current Sinking

DS011136-24

LMC6041 データシート(PDF) 4 Page - National Semiconductor (TI)

LMC6041 データシート(HTML) 4 Page - National Semiconductor (TI)

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12

データシートダウンロード