NTCACAP Series for Refrigerator

www.vishay.com

Vishay BCcomponents

Revision: 03-Feb-17

2

Document Number: 29095

THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT

DIMENSIONS in millimeters

Notes

MOUNTING

The plastic housing can be inserted in a pocket inside the refrigerator cabinet.

The plastic housing can be assembled with the refrigerator cabinet backside, with the help of adhesive tape, then foamed.

The plastic housing can be inserted on a pipe welded on the evaporator tube.

The plastic housing can be clamped on the evaporator tube with the help of a clip.

Suitable for PCB Edge connection, or plugged in a wire-to-wire connector, or assembled in a terminal block.

DESIGN-IN SUPPORT

• Other Resistance-Temperature curves are available, based on Vishay NTCC100E4 series, or specific customer’s curve.

• Other lead length and other standard plastic caps, like Ø 6 mm x 25 mm, Ø 7 mm x 25 mm, Ø 8 mm x 30 mm,

Ø 9 mm x 30 mm, Ø 9 mm x 49 mm, 7 mm x 7.5 mm x 25 mm or customer specific sensor shapes, are available on request.

• Single insulated cables and Class I sensors can also be supplied.

• The sensors can be supplied without connector, with end-wire stripped, with crimped connectors, sealed connectors, or

insulation displacement connectors (e.g. rast 2.5 mm). Consult Vishay for the list of available connectors.

• Several sensors can be grouped on the same connector, with the same or different shape.

• Additional features, like connection to the door switch, can also be included on the grouping connector.

• Visual aids, like cable jacket colors or position markers can be added to optimize customer's assembling process.

• The cable harness associated with the sensor can be provided as a total solution.

DESIGNERS TOOLS

4.

3.

2.

1.