Micronas

page 1 of 1

Subject:

Data Sheet Concerned:

Supplement:

Edition:

Data Sheet Supplement

Changes:

– position tolerance of the sensitive area reduced

– tolerances of the outline dimensions reduced

– thickness of the leadframe changed to 0.15 mm (old 0.125 mm)

– SOT-89A will be discontinued in December 2000

Position of sensitive area

Note: A mechanical tolerance of

±0.05 mm applies to all dimensions where no tolerance is explicitly given.

Position tolerance of the sensitive area is defined in the package diagram.

HAL 114, 115

HAL 50x, 51x

HAL 621, 629

HAL 55x, HAL 56x

x

center of the package

center of the package

y

0.95 mm nominal

0.85 mm nominal

min.

0.25

2.55

0.4

0.4

0.4

1.5

3.0

branded side

SPGS0022-5-A3/2E

y

12

3

0.15

0.3

4.55

1.7

2

∅ 0.2

sensitive area

top view

1.15

Improvement of SOT-89B Package

HAL 114, 115, 6251-456-2DS, Dec. 20, 1999

HAL 50x, 51x, 6251-485-1DS, Feb. 16, 1999

HAL 55x, 56x, 6251-425-1DS, April 6, 1999

HAL 621, 629, 6251-504-1DS, Feb. 3, 2000

No. 1/ 6251-531-1DSS

July 4, 2000

HAL 11x, HAL 5xx, HAL 62x