3

Figure 1. Proper right angle mounting to a PC board to prevent protruding anode tab from shorting

to cathode c onnection.

Package Dimensions

A) Flat Top Lamps

B) Diffused and Nondiffused Dome Lamps

0.46

0.56

(0.018)

(0.022)

1.40

1.65

(0.055)

(0.065)

0.25 (0.010) MAX.*

NOTE 2

0.20 (0.008) MAX.

0.50 (0.020) REF.

NOTE 3

ANODE

1.65

1.91

(0.065)

(0.075)

DIA.

CATHODE

11.68

10.67

(0.460)

(0.420)

BOTH SIDES

1.14

1.40

(0.045)

(0.055)

0.63

0.38

(0.025)

(0.015)

2.21

1.96

(0.087)

(0.077)

0.18

0.23

(0.007)

(0.009)

0.76 (0.030)

0.79 (0.031)

2.44

1.88

(0.096)

(0.074)

2.08

2.34

(0.082)

(0.092)

CATHODE

STRIPE

* REFER TO FIGURE 1 FOR DESIGN CONERNS.

NOTE 3

CATHODE STRIPE

NOTE 3

Notes:

1. All dimensions are in millimetres (inches).

2. Protruding support tab is connected to anode lead.

3. Lead polarity for these TS AlGaAs subminiature lamps is opposite to the

lead polarity of subminiature lamps using other led technologies.

0.50 (0.020) REF.

0.46

0.56

(0.018)

(0.022)

0.25 (0.010) MAX.*

NOTE 2

0.20 (0.008) MAX.

NOTE 3

ANODE

1.65

1.91

(0.065)

(0.075)

DIA.

CATHODE

11.68

10.67

(0.460)

(0.420)

BOTH SIDES

0.94

1.24

(0.037)

(0.049)

2.92 (0.115)

MAX.

0.76

0.89

(0.030)

(0.035)

R.

0.63

0.38

(0.025)

(0.015)

2.03 (0.080)

1.78 (0.070)

0.79 (0.031)

0.53 (0.021)

0.18

0.23

(0.007)

(0.009)

2.08

2.34

(0.082)

(0.092)

CATHODE

STRIPE

NOTE 3

2.21

1.96

(0.087)

(0.077)

CATHODE STRIPE

NOTE 3

CATHODE STRIPE

NOTE 3

NO. CATHODE DOWN.

YES. ANODE DOWN.

ANODE

TAB