TTL-232RG-VIP-WE datasheet(7/18 Pages) FTDI

7 / 18 page

Document Reference No.: FT_000188

TTL TO USB SERIAL CONVERTER GENERIC CABLES Datasheet

Version 1.4

Clearance No.: FTDI# 129

2.2 Features



TTL-232RG generic converter cable provides a

USB to TTL Serial interface with various logic

levels.



On board FT232RQ provides single chip USB to

asynchronous serial data transfer interface.



Entire USB protocol handled by the electronics

in the cable USB.



Connect directly to a microcontroller UART or

I/O pins.



UART interface support for 7 or 8 data bits, 1

or 2 stop bits and odd / even / mark / space /

no parity.



Fully assisted hardware (RTS#/CTS#) or X-On

/ X-Off software handshaking.



Data transfer rates from 300 baud to 3 Mbaud

at TTL levels.



Internal EEPROM with user writeable area.



Wide range of output drive voltages 1.8V to

5.0V safe TTL inputs makes the TTL-232RG

easy to interface to 5.0V MCU’s.



FTDI’s royalty-free VCP allow for

communication as a standard emulated COM

port and D2XX ‘direct’ drivers provide DLL

application programming interface.



Support for FT232R FTDIChip-ID™ feature for

improved security.



Voltage output power allows external logic to

be powered from the USB port.



Cable can be used to accept IO voltage from

application interface logic allowing users to

supply IO voltage levels.



6 way outputs provide Tx, Rx, RTS#, CTS#,

VCC and GND.



Low USB bandwidth consumption.



UHCI / OHCI / EHCI host controller compatible.



USB 2.0 (12Mb/s) Full Speed compatible.



-40°C to +85°C operating temperature range.



Cable length is 1.80m (6 feet).



FCC and CE compliant.



Custom versions also available (subject to

MOQ).

TTL-232RG-VIP-WE データシート(PDF) 7 Page - Future Technology Devices International Ltd.

TTL-232RG-VIP-WE データシート(HTML) 7 Page - Future Technology Devices International Ltd.

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18

データシートダウンロード