| データシートサーチシステム |
|
SPV1050 データシート(PDF) 1 Page - STMicroelectronics |
|
|
|||||||||||||||||||||||||||||
SPV1050 データシート(HTML) 1 Page - STMicroelectronics |
|
1 / 36 page ![]() This is information on a product in full production. August 2015 DocID025569 Rev 4 1/36 SPV1050 Ultralow power energy harvester and battery charger Datasheet - production data Features Transformerless thermoelectric generators and PV modules energy harvester High efficiency for any harvesting source Up to 70 mA maximum battery charging current Fully integrated buck-boost DC-DC converter Programmable MPPT by external resistors 2.6 V to 5.3 V trimmable battery charge voltage level (± 1% accuracy) 2.2 V to 3.6 V trimmable battery discharge voltage level (± 1% accuracy) Two fully independent LDOs (1.8 V and 3.3 V output) Enable/disable LDO control pins Battery disconnect function for battery protection Battery connected and ongoing charge logic open drain indication pins Applications Charge any battery type, including lithium based, solid state thin film and super-capacitor. WSN, HVAC, building and home automation, industrial control, remote metering, lighting, security, surveillance. Wearable and biomedical sensors, fitness. Description The SPV1050 is an ultralow power and high- efficiency energy harvester and battery charger, which implements the MPPT function and integrates the switching elements of a buck-boost converter. The SPV1050 device allows the charge of any battery, including the thin film batteries, by tightly monitoring the end-of-charge and the minimum battery voltage in order to avoid the overdischarge and to preserve the battery life. The power manager is suitable for both PV cells and TEG harvesting sources, as it covers the input voltage range from 75 mV up to 18 V and guarantees high efficiency in both buck-boost and boost configuration. Furthermore the SPV1050 device shows very high flexibility thanks also to the trimming capability of the end-of-charge and undervoltage protection voltages. In such way any source and battery is matched. The MPPT is programmable by a resistor input divider and allows maximizing the source power under any temperature and irradiance condition. An unregulated voltage output is available (e.g. to supply a microcontroller), while two fully independent LDOs are embedded for powering sensors and RF transceivers. Both LDOs (1.8 V and 3.3 V) can be independently enabled through two dedicated pins. VFQFPN 3 x 3 x 1 mm 20L Die form www.st.com |
同様の部品番号 - SPV1050 |
|
同様の説明 - SPV1050 |
|
|
リンク URL |
| ALLDATASHEETはお客様のビジネスに役立ちますか? [ DONATE ] |
Alldatasheetは | 広告 | お問い合わせ | プライバシーポリシー | データシートへのリンク | リンク交換 | メーカーリスト All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |