MPXM2010GS datasheet(2/8 Pages) MOTOROLA

2 / 8 page

MPXM2010 SERIES

Motorola Sensor Device Data

MAXIMUM RATINGS(NOTE)

Rating

Symbol

Value

Unit

Maximum Pressure (P1 > P2)

Pmax

kPa

Storage Temperature

Tstg

–40 to +125

°C

Operating Temperature

–40 to +125

°C

NOTE: Exposure beyond the specified limits may cause permanent damage or degradation to the device.

OPERATING CHARACTERISTICS (VS = 10 Vdc, TA = 25°C unless otherwise noted, P1 > P2)

Characteristic

Symbol

Min

Typ

Max

Unit

Pressure Range(1)

POP

—

kPa

Supply Voltage(2)

—

Vdc

Supply Current

—

6.0

—

mAdc

Full Scale Span(3)

VFSS

Offset(4)

Voff

–1.0

—

1.0

Sensitivity

∆V/∆P

—

2.5

—

mV/kPa

Linearity(5)

—

–1.0

—

1.0

%VFSS

Pressure Hysteresis(5) (0 to 10 kPa)

—

±0.1

—

%VFSS

Temperature Hysteresis(5) (–40

°C to +125°C)

—

±0.5

—

%VFSS

Temperature Effect on Full Scale Span(5)

TCVFSS

–1.0

—

1.0

%VFSS

Temperature Effect on Offset(5)

TCVoff

–1.0

—

1.0

Input Impedance

Zin

1000

—

2550

Ω

Output Impedance

Zout

1400

—

3000

Ω

Response Time(6) (10% to 90%)

—

1.0

—

Warm–Up

—

Offset Stability(7)

—

±0.5

—

%VFSS

NOTES:

1. 1.0 kPa (kiloPascal) equals 0.145 psi.

2. Device is ratiometric within this specified excitation range. Operating the device above the specified excitation range may induce additional

error due to device self–heating.

3. Full Scale Span (VFSS) is defined as the algebraic difference between the output voltage at full rated pressure and the output voltage at the

minimum rated pressure.

4. Offset (Voff) is defined as the output voltage at the minimum rated pressure.

5. Accuracy (error budget) consists of the following:

• Linearity:

Output deviation from a straight line relationship with pressure, using end point method, over the specified

pressure range.

• Temperature Hysteresis: Output deviation at any temperature within the operating temperature range, after the temperature is

cycled to and from the minimum or maximum operating temperature points, with zero differential pressure

applied.

• Pressure Hysteresis:

Output deviation at any pressure within the specified range, when this pressure is cycled to and from the

minimum or maximum rated pressure, at 25

°C.

• TcSpan:

Output deviation at full rated pressure over the temperature range of 0 to 85

°C, relative to 25°C.

• TcOffset:

Output deviation with minimum rated pressure applied, over the temperature range of 0 to 85

°C, relative

to 25

°C.

6. Response Time is defined as the time for the incremental change in the output to go from 10% to 90% of its final value when subjected to

a specified step change in pressure.

7. Offset stability is the product’s output deviation when subjected to 1000 hours of Pulsed Pressure, Temperature Cycling with Bias Test.

MPXM2010GS データシート(PDF) 2 Page - Motorola, Inc

MPXM2010GS データシート(HTML) 2 Page - Motorola, Inc

Html Pages

1 2 3 4 5 6 7 8

データシートダウンロード

リンク URL

MPXM2010GS データシート(PDF) 2 Page - Motorola, Inc

MPXM2010GS データシート(HTML) 2 Page - Motorola, Inc

Html Pages

1 2 3 4 5 6 7 8

データシート ダウンロード

リンク URL

データシートダウンロード