Series P

Internationally Approved Toggles

A96

A

www.nkkswitches.com

Electrical Capacity

Resistive Load:

10A @ 125V AC or 6A @ 250V AC

Motor Load:

400W @ 125V AC

Lamp Load:

2A @ 125V AC for On-Off-On circuit & 3A @ 125V AC for other circuits

Other Ratings

Contact Resistance:

10 milliohms maximum

Insulation Resistance:

1,000 megohms minimum @ 500V DC

Dielectric Strength:

2,000V AC minimum between contacts for 1 minute minimum;

4,000V AC minimum between contacts & case for 1 minute minimum

Mechanical Life:

100,000 operations minimum

Electrical Life:

25,000 operations minimum

Angle of Throw:

25°

Materials & Finishes

Toggle Cap:

Polypropylene

Lever:

Brass with chrome plating

Bushing:

Brass with nickel plating

Frame:

Stainless steel

Case/Base:

Diallyl phthalate resin (UL94V-0)

Movable Contacts:

Silver alloy with silver plating

Stationary Contacts:

Pure silver with silver plating

Terminals:

Copper with silver plating

Environmental Data

Operating Temp Range:

–10°C through +85°C (+14°F through +185°F)

Humidity:

90 ~ 95% humidity for 96 hours @ 40°C (104°F)

Vibration:

10 ~ 55Hz with peak-to-peak amplitude of 1.5mm traversing the frequency range & returning

in 1 minute; 3 right angled directions for 2 hours

Shock:

Installation

Soldering Time & Temp:

Wave Soldering Recommended (Straight PC): See Profile A in Supplement section.

Manual Soldering: See Profile A in Supplement section.

Cleaning:

These devices are not process sealed. Hand clean locally using alcohol based solution.

Standards & Certifications

Flammability Standards:

UL94V-0 rated case/base

UL:

File No. E44145 - Recognized only when ordered with marking on switch.

Add “/U” or “/CUL” to end of part number to order UL recognized switch.

All models recognized at 10A @ 125V AC & 6A @ 250V AC.

CSA:

File No. 023535_0_000 - Certified only when ordered with marking on switch.

Add “/C” to end of part number to order CSA certified switch.

All models certified at 10A @ 125V AC & 6A @ 250V AC.

VDE:

License No. 119174

All models approved at 10A @ 125V AC & 6A @ 250V AC.

Marking on switch is standard. All models meet EN 61058-1 standard.