TUSB8043RGCT datasheet(15/59 Pages) TI1

15 / 59 page

TUSB8043

www.ti.com

SLLSEW4 – JUNE 2017

Product Folder Links: TUSB8043

Submit Documentation Feedback

8.3.2

USB Power Management

The TUSB8043 can be configured for power switched applications using either per-port (Full power managed) or

ganged power-enable controls and over-current status inputs. When battery charge is enabled, the TUSB8043

will always function in full power managed.

Power switch support is enabled by REG_5h (fullPwrMgmtz) and the per-port or ganged mode is configured by

REG_5h(ganged).

The TUSB8043 supports both active high and active low power-enable controls. The PWRCTL[4:1] polarity is

configured by REG_Ah(pwrctlPol).

8.3.3 I2C Programming Support Using Internal Hid to I2C Interface

The TUSB8043 I2C programming mode is supported using class-specific requests through the HID interface. The

HID's embedded port will be numbered 1 greater than the highest numbered exposed port. The internal HID to

I2C function of the TUSB8043 does not have an interrupt OUT endpoint. The TUSB8043 supports GET REPORT

(Input) through the HID interrupt and control endpoints. The GET REPORT (Feature) and SET REPORT (Output)

occurs through the control endpoint.

Table 3. HID Requests I2C Programming Support

COMMAND

bmRequestType

bRequest

wValue

wIndex

wLength

DATA

Setup field Offset

Offset = 0

Offset = 1

Offset = 2

Offset = 4

Offset = 6

N/A

GET REPORT

A1H

01H

0100H – input

0300H - feature

0000H

Report Length

Report

SET REPORT

21H

09H

0200H – output

0000H

Report Length

Report

Other HID class specific requests are optional and not supported (SET IDLE, SET PROTOCOL, GET IDLE, GET

PROTOCOL) . Also report IDs are not required since all requests are not interleaved.

TUSB8043RGCT データシート(PDF) 15 Page - Texas Instruments

TUSB8043RGCT データシート(HTML) 15 Page - Texas Instruments

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59

データシートダウンロード