 |
データシートサーチシステム |
|
|
データシートサーチシステム |
|
AD9410 データシート(PDF) 3 Page - Analog Devices |
|
|
|||||||||||||||||||||||||||||
AD9410 データシート(HTML) 3 Page - Analog Devices |
|
|
3 / 20 page  REV. 0 –3– AD9410 DIGITAL SPECIFICATIONS Test Parameter Temp Level Min Typ Max Unit DIGITAL INPUTS DFS, Input Logic “1” Voltage Full IV 4 V DFS, Input Logic “0” Voltage Full IV 1 V DFS, Input Logic “1” Current Full V 50 µA DFS, Input Logic “0” Current Full V 50 µA I/P Input Logic “1” Current 1 Full V 400 µA I/P Input Logic “0” Current 1 Full V 1 µA ENCODE, ENCODE Differential Input Voltage Full IV 0.4 V ENCODE, ENCODE Differential Input Resistance Full V 1.6 k Ω ENCODE, ENCODE Common-Mode Input Voltage2 Full V 1.5 V DS, DS Differential Input Voltage Full IV 0.4 V DS, DS Common-Mode Input Voltage Full V 1.5 V Digital Input Pin Capacitance 25 °CV 3 pF DIGITAL OUTPUTS Logic “1” Voltage (VDD = 3.3 V) Full VI VDD – 0.05 V Logic “0” Voltage (VDD = 3.3 V) Full VI 0.05 V Output Coding Binary or Two’s Complement NOTES 1I/P pin Logic “1” = 5 V, Logic “0” = GND. It is recommended to place a series 2.5 k Ω (±10%) resistor to VDD when setting to Logic “1” to limit input current. 2See Encode Input section in Applications section. Specifications subject to change without notice. AC SPECIFICATIONS Test Parameter Temp Level Min Typ Max Unit DYNAMIC PERFORMANCE Transient Response 25 °CV 2 ns Overvoltage Recovery Time 25 °CV 2 ns Signal-to-Noise Ratio (SNR) (Without Harmonics) fIN = 10.3 MHz 25 °C I 52.5 55 dB fIN = 82 MHz 25 °C I 52 54 dB fIN = 160 MHz 25 °CV 53 dB Signal-to-Noise Ratio (SINAD) (With Harmonics) fIN = 10.3 MHz 25 °C I 51 54 dB fIN = 82 MHz 25 °C I 50 53 dB fIN = 160 MHz 25 °CV 52 dB Effective Number of Bits fIN = 10.3 MHz 25 °C I 8.3 8.8 Bits fIN = 82 MHz 25 °C I 8.1 8.6 Bits fIN = 160 MHz 25 °C V 8.4 Bits Second Harmonic Distortion fIN = 10.3 MHz 25 °C I –56 –65 dBc fIN = 82 MHz 25 °C I –55 –63 dBc fIN = 160 MHz 25 °C V –65 dBc Third Harmonic Distortion fIN = 10.3 MHz 25 °C I –58 –69 dBc fIN = 82 MHz 25 °C I –57 –67 dBc fIN = 160 MHz 25 °C V –62 dBc Spurious Free Dynamic Range (SFDR) fIN = 10.3 MHz 25 °C I 56 61 dBc fIN = 82 MHz 25 °C I 54 60 dBc fIN = 160 MHz 25 °C V 58 dBc Two-Tone Intermod Distortion IMD1 fIN1 = 80.3 MHz, fIN2 = 81.3 MHz 25 °C V 58 dBFS NOTES 1IN1, IN2 level = –7 dBFS. Specifications subject to change without notice. (VDD = 3.3 V, VD = 3.3 V, VCC = 5.0 V; 2.5 V external reference; AIN = –0.5 dBFS; Clock input = 210 MSPS; TA = 25 C; unless otherwise noted.) (VDD = 3.3 V, VD = 3.3 V, VCC = 5.0 V; 2.5 V external reference; AIN = –0.5 dBFS; Clock input = 210 MSPS; TA = 25 C; unless otherwise noted.) |
|
|
リンク URL |
| ALLDATASHEETはお客様のビジネスに役立ちますか？ [ DONATE ] |
Alldatasheetは | 広告 | お問い合わせ | プライバシーポリシー | データシートへのリンク | リンク交換 | メーカーリスト All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |
Japanese ▼
English
Chinese
German
Japanese
Russian
Korean
Spanish
French
Italian
Portuguese
Polish
Vietnamese
Indian
Mexican
British
New Zealand
