210 データシート, PDF

メーカー	部品番号	データシート	部品情報
CTS Corporation	210	602Kb/2P	AUTO-DIP짰 Switch Automatically Insertable, Wave Solderable, Board Washable DIP Switch
Marl International Limi...	210	290Kb/5P	Direct replacement for T3 쩌 Midget Edison Screw E10
Alpha Wire	210	178Kb/2P	M8 Female 3 Pin Field Attachable
Abbatron All Rights Res...	210	4Mb/60P	Premier Supplier of Electronic Hardware
Keystone Electronics Co...	210	527Kb/1P	BATTERY CONTACTS FOR MOLDED CASES 31-07 20th
Ohmite Mfg. Co.	210	260Kb/2P	Dividohm® Vitreous Enamel Adjustable Power
Walther-Werke	210 406 DF	1Mb/2P	Plugs IP 44 and IP 67
	210 DF	1Mb/2P	Plugs IP 44 and IP 67
	210 PH	1Mb/2P	Plugs IP 44 and IP 67
	210 PHNI	1Mb/2P	Plugs IP 44 and IP 67
	210 SW	401Kb/2P	IEC60309 PIN & SLEEVE DEVICES • LIGHT & STAGE DEVICES
WAGO Kontakttechnik Gmb...	210-103	680Kb/9P	3-conductor through terminal block; with push-button; 10 mm²; with test port; suitable for Ex i applications; side and center marking; for DIN-rail 35 x 15 and 35 x 7.5; Push-in CAGE CLAMP®; 10,00 mm2; blue 05.09.2019
	210-110	638Kb/7P	Relay module; Nominal input voltage 03.10.2022
	210-112	154Kb/17P	4-conductor through terminal block; 4 mm2; center marking;for DIN-rail 35 x 15 and 35 x 7.5; CAGE CLAMP;4,00 mm2;red 17. 10. 2023
	210-112	1Mb/11P	2-conductor through terminal block; 16 mm²; center marking; for DIN-rail 35 x 15 and 35 x 7.5; CAGE CLAMP®; 16,00 mm²; blue 24.09.2020
	210-112	422Kb/7P	2-channel digital input; 24 VDC; 3 ms 29.04.2023
	210-112	229Kb/7P	Distribution terminal block; with push-button; 1 x 6 mm² / 6 x 1.5 mm²; with integrated end plate; suitable for Ex e II applications; side and center marking; for DIN-rail 35 x 15 and 35 x 7.5; Push-in CAGE CLAMP®; 6,00 mm²; gray 03.11.2022
	210-113	154Kb/17P	4-conductor through terminal block; 4 mm2; center marking;for DIN-rail 35 x 15 and 35 x 7.5; CAGE CLAMP;4,00 mm2;red 17. 10. 2023
	210-113	680Kb/9P	3-conductor through terminal block; with push-button; 10 mm²; with test port; suitable for Ex i applications; side and center marking; for DIN-rail 35 x 15 and 35 x 7.5; Push-in CAGE CLAMP®; 10,00 mm2; blue 05.09.2019
	210-113	1Mb/11P	2-conductor through terminal block; 16 mm²; center marking; for DIN-rail 35 x 15 and 35 x 7.5; CAGE CLAMP®; 16,00 mm²; blue 24.09.2020

210 データシート, PDF

リンク URL