General Description

HT16511 is a VFD (Vacuum Fluorescent Display) controller/driver that is driven on a 1/8 to 1/16 duty factor. It consists of 12 segment output lines, 8 grid output lines, 8 segment/grid output drive lines, 5 LED output ports, a control circuit, a display memory, and a key scan circuit. Serial data inputs to the HT16511 through a three-line serial interface. This VFD controller/driver is ideal as a peripheral device for an MCU.

Features

• Logic voltage: 5V

• High-voltage output: VDD-35V max.

• Multiple display

   (12-segment & 16-digit to 20-segment & 8-digit)

• 12 x 4 matrix key scanning

• 8 steps dimmer circuit

• 5 LED output ports (20mA max.)

• 4-bit general purpose input port

• No external resistors necessary for driver output

   (provides PMOS open-drain and pull-low resistor output)

• Serial interface with MCU (CLK, CS, DI, DO)

• 52-pin QFP package

Applications

• Consumer products panel function control

• Industrial measuring instrument panel function control

• Other similar application panel function control