General Description
The AOZ6662DI and AOZ6662DI-01 are high efficiency,
easy to use, 2A synchronous buck regulators at fixed
switching frequency for small form factor solution. Both
AOZ6662DI and AOZ6662DI-01 work from 4.5V to 18V
input voltage range, and provides up to 2A of continuous
output current with an output voltage adjustable down to
0.6V.
The AOZ6662DI features fixed frequency operation at
heavy load and Pulse Energy Mode (PEM) at light load,
providing best efficiency across whole load range.
The AOZ6662DI-01 features fixed frequency operation at
any load when output voltage is set to be lower than 4V.
This makes it a perfect fit for low noise audio application.
When output is set to be higher than 4V, Pulse Energy
Mode (PEM) is automatically enabled to achieve high
efficiency at standby light load. This allows flexible
solution to use a single product for multiple power rails
with different requirement.
Both AOZ6662DI and AOZ6662DI-01 come in a DFN
3mm x 3mm 8-lead package and is rated over a -40°C to
+85°C operating ambient temperature range.

Features
 4.5V to 18V operating input voltage range
 2A continuous output current
 Low on-resistance:
- 145mΩ high-side
- 90mΩ low-side
 Up to 95% efficiency
 AOZ6662DI light load mode:
- Pulse Energy Mode (PEM)
 AOZ6662DI-01 light load mode:
- Fixed frequency if VOUT < 4V
- Pulse Energy Mode (PEM) if VOUT > 4V
 87% light load efficiency at 10mA with PEM
 Minimum output voltage at 0.6V
 750kHz PWM operation
 Fixed internal soft start
 Capable to handle pre-bias start-up
 Cycle-by-cycle current limit
 Short-circuit protection
 Thermal shutdown

Applications
 High reliable DC/DC converters
 High performance LCD TV
 High performance cable modems