GENERAL DESCRIPTION
The ADP5024 combines two high performance buck regulators and one low dropout (LDO) regulator in a small, 24-lead, 4 mm × 4 mm LFCSP to meet demanding performance and board space requirements.
The high switching frequency of the buck regulators enables tiny multilayer external components and minimizes the board space. When the MODE pin is set high, the buck regulators operate in forced PWM mode. When the MODE pin is set low, the buck regulators operate in PWM mode when the load current is above a predefined threshold. When the load current falls below a predefined threshold, the regulator operates in power save mode (PSM), improving the light load efficiency.

FEATURES
   Main input voltage range: 2.3 V to 5.5 V
   Two 1200 mA buck regulators and one 300 mA LDO
   24-lead, 4 mm × 4 mm LFCSP package
   Regulator accuracy: ±1.8%
   Factory programmable or external adjustable VOUTx
   3 MHz buck operation with forced PWM and automatic
      PWM/PSM modes
   BUCK1/BUCK2: output voltage range from 0.8 V to 3.8 V
   LDO: output voltage range from 0.8 V to 5.2 V
   LDO: input supply voltage from 1.7 V to 5.5 V
   LDO: high PSRR and low output noise

APPLICATIONS
   Power for processors, ASICS, FPGAs, and RF chipsets
   Portable instrumentation and medical devices
   Space constrained devices