AXL E S3 DI8 DO4 2A M12 6P

8563_en_04

PHOENIX CONTACT

6

Limitation of the voltage induced on circuit interruption

-28 V ... -17 V

Output voltage when switched off

max. 1 V

Output current when switched off

max. 20 µA

Behavior with overload

Auto restart

Reverse voltage resistance to short pulses

Reverse voltage proof

Overcurrent shut-down

min. 0.7 A

Overload protection, short-circuit protection of outputs

Electronic

Electrical isolation/isolation of the voltage areas

Test section

Test voltage

24 V supply (communications power and sensor supply, digital inputs)/

bus connection (Ethernet 1)

500 V AC, 50 Hz, 1 min

24 V supply (communications power and sensor supply, digital inputs)/

bus connection (Ethernet 2)

500 V AC, 50 Hz, 1 min

24 V supply (communications power and sensor supply, digital inputs)/FE

500 V AC, 50 Hz, 1 min

Bus connection (Ethernet 1)/FE

500 V AC, 50 Hz, 1 min

Bus connection (Ethernet 2)/FE

500 V AC, 50 Hz, 1 min

Bus connection (Ethernet 1)/bus connection (Ethernet 2)

500 V AC, 50 Hz, 1 min

24 V supply (actuator supply, digital outputs)/

24 V supply (communications power and sensor supply, digital inputs)

500 V AC, 50 Hz, 1 min

24 V supply (actuator supply, digital outputs)/bus connection (Ethernet 1)

500 V AC, 50 Hz, 1 min

24 V supply (actuator supply, digital outputs)/bus connection (Ethernet 2)

500 V AC, 50 Hz, 1 min

24 V supply (actuator supply, digital outputs)/FE

500 V AC, 50 Hz, 1 min

Mechanical tests

Vibration resistance in acc. with EN 60068-2-6/IEC 60068-2-6

5g

Shock in acc. with EN 60068-2-27/IEC 60068-2-27

30g, 11 ms period, half-sine shock pulse

Continuous shock according to EN 60068-2-27/IEC 60068-2-27

10g

Conformance with EMC Directive 2004/108/EC

Noise immunity test in accordance with EN 61000-6-2

Electrostatic discharge (ESD) EN 61000-4-2/IEC 61000-4-2

Criterion B; 6 kV contact discharge, 8 kV air discharge

Electromagnetic fields EN 61000-4-3/IEC 61000-4-3

Criterion A; Field intensity: 10 V/m

Fast transients (burst) EN 61000-4-4/IEC 61000-4-4

Criterion B, 2 kV

Transient surge voltage (surge) EN 61000-4-5/IEC 61000-4-5

Criterion B; DC supply lines: ±0.5 kV/±0.5 kV

(symmetrical/asymmetrical)

Conducted interference EN 61000-4-6/IEC 61000-4-6

Criterion A; Test voltage 10 V

Noise emission test as per EN 61000-6-4

Radio interference properties EN 55022

Class A

Approvals

For the latest approvals, please visit phoenixcontact.net/products.

Digital outputs