8563 datasheet(19/23 Pages) PHOENIX

19 / 23 page

AXL E S3 DI8 DO4 2A M12 6P

8563_en_04

PHOENIX CONTACT

Password (IDN S-0-00267)

In the default setting some parameters of the device are

write-protected with a password. If you try to change pass-

word-protected parameters without lifting the write protec-

tion, error 7009

hex is output via the service channel (opera-

tion data is password write-protected).

The password can be changed and the write protection can

be activated or deactivated via IDN S-0-0267. Passwords

can only comprise UTF8 characters without spaces and are

stored retentively.

The default password is PW170875.

The list of password-protected parameters can be found in

IDN S-0-0279.

The following IDNs are password protected:

14.1

Change password

To change the password, the currently active password, the

new password, and, for confirmation, the new password

again must be sent to the device, each separated by a

space. Changing the password automatically activates write

protection for all password-protected parameters.

14.2

Activate write protection

There are three methods for activating password-protected

write protection:

–

Switch the power supply off and back on. Once the de-

vice is restarted, write protection is activated.

–

Overwrite the password parameter with something oth-

er than the password.

–

Change the existing password.

14.3

Deactivate write protection

The write protection is deactivated by overwriting the pass-

word parameter with the current password.

IP address assignment

The IP address is changed via the following IDNs:

The IP address can be changed via the Sercos parameter

S-0-1020.

The subnet mask can be changed via parameter S-0-1021

and the gateway address via parameter S-0-1022.

The IDN S-0-1048 is used to activate the IP address via

Sercos.

Monitoring connection (connection

setup, IDN S-0-1050.x.1)

The following connection monitoring mechanisms are sup-

ported (bit 0 and bit 1 of IDN S-0-1050.x.1):

–

Producer cycle, synchronous operation (00

bin)

–

Asynchronous operation without watchdog (10

bin)

Electronic rating plate

(IDNs S-0-1300.x.y)

The electronic rating plate comprises the

IDNs S-0-1300.x.y. See the table in the “Sercos parameter”

section.

IDN

Description

S-0-1020

IP address

S-0-1021

Subnet mask

S-0-1022

Gateway address

If the password is read via the service chan-

nel, the device will send the password as a

string with 3 “*” characters (UTF8 code 0x2A)

if the write protection is activated or as a string

with 3 “$” characters (UTF8-Code 0x24) if the

write protection is deactivated and not as

plain text.

IDN

Description

S-0-1020

IP address

S-0-1021

Subnet mask

S-0-1022

Gateway address

S-0-1048

Procedure Command - activation of the

IP parameters

All parameters are password-protected. For

further information, please refer to the “Pass-

word” section.

The modified IP address parameters are not

stored retentively on the device. In the case of

a voltage reset, these parameters need to be

re-transmitted.

8563 データシート(PDF) 19 Page - PHOENIX CONTACT

8563 データシート(HTML) 19 Page - PHOENIX CONTACT

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23

データシートダウンロード